Cart
0 Products, Production Time: 7 Business Days
progress indicator
Adding product...
Tel: 866-441-9157

Below is Product Use and Adjustment Information for your Comp-Tac Accessories. If you have additional questions please call 281-209-3040 and ask one of our friendly staff.

Belt- Kydex Lined, Contoured

Please visit the Kydex Lined Contour Belt Page to learn more about the product.

For More Information please contact us at 281-209-3040.





ATTENTION: SIZING:

Please read our belt-sizing instructions!



To ensure an accurate belt measurement, lay your current belt flat on a table:

*If you currently carry an Inside the Waistband Holster and will continue: Measure from the end of the buckle to the hole you use most often. Subtract two inches.

*If you DO NOT carry Inside the Waistband BUT WANT TO START: Measure from the end of the buckle to the hole you use most often. Order that length belt.

*If you carry outside the waistband and will continue to carry outside the waistband: Measure from the end of the buckle to the hole you use the most often. Subtract two inches.

Leather is natural product with unique characteristics that differ from hide to hide. Due to these differences shade and color variations are to be expected. This is not a fault or flaw in leather, Comp-Tac uses genuine natural top grain cow-hide to make all of our Comp-Tac leather products.

Warranty: Comp-Tac products are covered under a one year warranty and the 30 NO-BS Guarantee. Due to the cosmetic vulnerability of leather, Comp-Tac reserves the right to charge a 20% restocking fee on any leather returns or exchanges that are deemed to be damaged or abused.  

Note: Sizes 30-48 are stock sizes and may be refunded or exchanged. All Velcro belts and sizes 28 as well as 50 or above are custom made and therefore are not eligible for refunds or exchanges.

Belt- Velcro Lined- Kydex Lined, Contoured





Please visit the Velcro Lined Kydex Reinforced Contour Belt Page to learn more about the product.

For More Information please contact us at 281-209-3040.



ATTENTION: SIZING:

Please read our belt-sizing instructions!

To ensure an accurate belt measurement, lay your current belt flat on a table:

*If you currently carry an Inside the Waistband Holster and will continue: Measure from the end of the buckle to the hole you use most often. Subtract two inches.

*If you DO NOT carry Inside the Waistband BUT WANT TO START: Measure from the end of the buckle to the hole you use most often. Order that length belt.

*If you carry outside the waistband and will continue to carry outside the waistband: Measure from the end of the buckle to the hole you use the most often. Subtract two inches.

Leather is natural product with unique characteristics that differ from hide to hide. Due to these differences shade and color variations are to be expected. This is not a fault or flaw in leather, Comp-Tac uses genuine natural top grain cow-hide to make all of our Comp-Tac leather products.

Warranty: Comp-Tac products are covered under a one year warranty and the 30 NO-BS Guarantee. Due to the cosmetic vulnerability of leather, Comp-Tac reserves the right to charge a 20% restocking fee on any leather returns or exchanges that are deemed to be damaged or abused.  

Note: Sizes 30-48 are stock sizes and may be refunded or exchanged. All Velcro belts and sizes 28 as well as 50 or above are custom made and therefore are not eligible for refunds or exchanges.

Kydex Body Information

To learn more about your Kydex Body please visit your Kydex Body Page:

MTAC Spare Body

Spartan Spare Body

Neutral Cant Spare Body

Infidel Ultra Spare Body

If you have any additional questions please call 281-209-3040.

Gladiator- Comp-Tac does not sell interchangeable Kydex Shells for the Gladiator. The Gladiator has a 3rd retention adjustment screw that must be hand drilled based on firearm make and model.

Changing Out Your Spare Body

Note: You will have to push the body upward to make the holes line up.         



To remove the Kydex body:

1)    Remove the two 5/8" tension screws and the two 3/8" retaining screws.  Set aside the screws, the cup washers, and the rubber bushings.

2)   Twist the Kydex body out of the leather backing until the t-nuts are freed.



To install the Kydex body:

1)   Insert the Kydex tab into the slot in the leather backing.  Maneuver the Kydex body until the t-nuts in the Kydex body are visible through the holes in the leather backing.  If this cannot be accomplished, remove the Kydex body, open the leather slot so that it will allow for easier entry, and try again.

2)   Put one of the 3/8" screws on the hex wrench, put a cup washer on the screw (smooth side towards screw head), and insert the screw into the t-nut in the Kydex body.  Turn the screw clockwise until it is firmly seated.  Repeat with the other 3/8" screw.

3)   Seat the two rubber bushings on the t-nuts in the leather backing near the trigger guard.  Rotate the Kydex body until the holes line up with the rubber bushings and t-nuts and compress the bushings to allow for easier entry.  Hold this position with one hand, and with the other insert a 5/8" screw (with a cup washer, similar to the 3/8" screws) into one of the t-nuts.  Turn the screw one full turn clockwise to ensure proper seating, and then repeat with the second 5/8" screw and washer.

4)     Tighten screws clockwise until you obtain the desired tension.  It is recommended that you test the tension with a cleared gun first without wearing the holster to get it close, and then while wearing the holster to address any issues caused by belt tension.



What is the best method to adjust the tension screws on my holster, the new body does not fit?



WARNING: ALL ADJUSTMENTS MUST BE DONE WITH AN UNLOADED FIREARM!



1)    Using an unloaded firearm, check the fit of your new holster.  Be sure to disengage all safeties, (including holding down a grip safety if present) while placing the gun in the holster.  This check will ensure that there is no way the holster could inadvertently press the trigger while re-holstering.

2)   Adjust the tensioning screws a quarter turn at a time to get the desired fit and level of retention desired.  We recommend adjusting in small increments and evenly.

3)   Put your holster on in a manner in which you intend to carry and, using an UNLOADED Firearm, check the fit one final time.

4)   After completing your pre-use fit checks, re-engage all safeties and use all safe gun handling practices.



NOTE:  Your Comp-Tac holster was designed for a specific make and model of firearm.  Comp-Tac does not recommend using any other make or model than the one specified.  Comp-Tac will not be responsible for any damage or personal injury to you or your firearm that is due to the improper use of our product.

 

Care and Maitenance for Spare Body

When adjusting the spare body on your Comp-Tac holster we recommend using Blue Loctite. This will help to keep the screws in place during use.

Before using your Comp-Tac spare body you will want to wipe the inside of the holster to remove any dust, dirt of debris that could scratch the finish of your handgun.

Do not leave your spare body in the car! Heat builds in your car and deforms Kydex.

Leather Backing Information

To learn more about your Leather Backing please visit your Leather Backing Page:

MTAC Leather Backing

Spartan Leather Backing

Neutral Cant Leather Backing

Infidel Ultra Leather Backing

If you have any additional questions please call 281-209-3040.

Leather Backing Care and Maintenance

To help preserve the color and luster of your leather backing you may use "Mink Oil" or "Neat's Foot Oil". Apply with a cotton cloth as needed to restore and maintain luster. You may also use a commercial conditioner such as Fiebing's Aussie Leather conditioner.

Light Holder

To learn more about your Light Holder please visit your Light Holder's page:

Light Holder- Belt Clip

If you have additional questions please call 281-209-3040.

Mounting Clip Information

To learn More about Your Clips and Mounting Hardware Please Visit the Page:

C-Clip

Flatline Mount Kit

Infidel Belt Clip

Infidel Belt Loops

Infidel CTAC Strut

International Mount Kit

PLM Attachment

Standard Clip

V-Clip

For Additional Questions Please call 281-209-3040.

Differences Between Standard Clips, C-Clips and V-Clips

Standard Clip (wraps around the front of the belt and attaches to the bottom edge of your belt). Available in Black, Brown, Chestnut, or Khaki for belt sizes from 1.25” to 1.75”.



C-Clip (attaches to the backside of the belt and is only visible via the part of the clip that wraps around the top and bottom edges of the belt).  Available in Black or Chestnut for belt sizes 1.25” to 1.75”.  The C-Clip offers the most secure attachment when using one of our Minotaur leather-backed holsters.



Velcro Clip (attaches to the inside of the belt using Velcro and remains completely concealed while you are wearing your holster).  Available in black, one size fits all.  A convenient method of utilizing this stealthy clip option is to couple it with one of our Kydex Reinforced Contour Belts with the optional Velcro lining sewn on the inside!



Infidel Clip Guide

The Infidel offers many different kinds of clips. Learn how to change the clips and which clips offer what features.
Our Infidel Max Holster allows the user to choose from several different types of hardware for different carry options. It comes completely ready to use in your preferred configuration, however, it may be changed to any of the other mounting methods. All mounting options are available for our 1.5 and 1.75 inch belts, and for both right and left handed users.















The Infidel Belt Clip is a two pronged clip that slides quickly and easily over the belt. It may be combined with the infidel CTAC Strut for additional support.


The Infidel Belt Loops provide additional security by wrapping around your belt and snapping closed. May be combined with the Infidel CTAC Strut for additional support.


The Infidel CTAC Strut is a rear strut for the Infidel Holster used for extra stability and also provides a small amount of cant adjustment. It must be used with either the Infidel Belt Clip or the Infidel Belt Loops. This option can help distribute the weight of larger guns on the belt for more comfort.


In each case, the Infidel Holster comes ready for any of these options to be securely attached and put into immediate use. The hardware involved with each mounting option includes flat-headed hex screws, an Allen wrench, rubber bushings, T-nuts, and screw-head nuts.













With the Infidel Belt Clip, whether you have the slotted or solid-back style, the clip will be attached at the top, as shown above.
Step 1: Place the Infidel clip against the holster making sure that the clip is correctly positioned with the holes lined up.
Step 2: Attach the clip by putting the screws firmly back in place, passing through the clip into the holster.
Step 3: Be sure to only partially tighten the first screw before installing the second. Just like putting a tire on a car, tighten the tension screws in rotation, a bit at a time. This keeps the tension even and allows for alignment of the second screw.

The Infidel Belt Loops are similarly attached. 











Step 1: Place the belt loops in a downward hanging position against the mounting holes. Loops will have to be unsnapped to allow the screw to pass through the loop backing.

Step 2: Begin replacing the screws. The screw will pass through the bottom part of the snap. If it sticks out or is uneven, it may prevent the snap from closing properly. Make sure your alignment is straight and that the screw goes in all the way.


For the CTAC Strut, you will remove the retention screws on the bottom left of the holster as shown below.









Step 1: Using the Allen wrench included in your order, remove the screws indicated above. The washers should also come away cleanly once the screws are removed.

Step 2: Place the strut inside the holster, between the rubber bushing and the inside of the Kydex on the screw end of the assembly. The T-nut and bushing should not be moved.

Step 3: Make sure that the strut is correctly positioned to align both holes with the retention screw assembly so that it will hold your holster at the correct angle. Attach the strut by putting the hardware firmly back in place, passing through the clip and the holster.

Step 4: You will need to adjust the holster retention during this operation to ensure proper fit. Depending on the thickness of the strut, you may need to trim a bit off the bushing.

When adjusting your holster’s retention remember:

     Step 1: Check that the holster is the correct model for your gun.

     Step 2: Ensure that your firearm is UNLOADED.

     Step 3: Double check that your firearm is unloaded!


TIPS AND TRICKS: A light application of medium blue or yellow Loctite on the threads of the T-nut and screw will secure the hardware to the user-selected level of retention.



For questions or comments about this post, please leave a comment or contact us directly at 281-209-3040.

Putting on Velcro Clips

  1. Place holster inside the waistband in a comfortable position.
  2. Align the holster along body to where you plan on carrying.
  3. Put belt on over belt clips and take note of where the clips are along your belt.
  4. Stick the adhesive side of Velcro to the belt inside of your belt at that spot. Try to align the Velcro so it is centered with the clips. This will help with lateral movement for better adjustment.
  5. With the newly attached Velcro, loosely feed your belt on and secure it in place.

Tips:

  • We recommend blind stich sewing the Velcro in place (most shoe shops will do this) as the adhesive will lose strength over time.
  • Blousing your shirt a little after putting your holster on will help reduce printing.
  • Velcro clips are best used on the Velcro Lined Comp-Tac Kydex Reinforced Contour Belt

Pepper Spray Holder

To learn more about your Pepper Spray Holder please visit the Pepper Spray Holder Pages:

Pepper Spray Holder- Belt Clip

If you have additional questions please call 281-209-3040.

Trojan Horse Long Gun Case

To learn more about your Trojan Horse Long Gun Case please visit the page.

If you have additional questions please call 281-209-3040.


Newsletter

Sign up for the Comp-Tac Newsletter to learn about Sales, Discounts and New Products!
© Copyright 2016 Comp-Tac Victory Gear. All rights reserved.