Shop By Gun
  • X

Magazine Concealment Pouch

As low as $42.00
SKU
C628

The Single Magazine Concealment Pouch allows you to carry a magazine Inside the Waistband (IWB) of your pants for concealed carry use. The top grain natural cowhide leather will feel soft against your skin while holding the magazine pouch securely and unobtrusively. Combined with a Comp-Tac Clip; Standard, C-Clip or V-Clip this pouch will hold your magazine in any situation.

Features of the Single Mag Concealment Pouch:

  • Top Grain natural Cowhide
  • Can be worn with different style clips
  • More universal fit than the Single Mag Pouch — Belt Clip

Comp-Tac Mag Pouches 101 (Full) from High Speed Gear on Vimeo.

What is RSC (Left Handed Shooter) or LSC (Right Hand Shooter) Mean?

A right handed shooter would wear their magazine pouch on the left hand side of their body with the retention screw toward their back. Photo is of LSC (Right Hand Shooter) Magazine Pouch. 

Make

Model

Size

Make

Model

Size

Make

Model

Size

1911 1911 9mm/40/45 Double Stack L HK USP Full Size .40 Steel M Sig 1911 GSR S
1911 1911 9mm/40/45 Single Stack S HK USP Full Size 9mm Plastic L Sig P220 S
Arsenal Strike 1 M HK USP Full Size 9mm Steel L Sig P226 .40/357 L
Beretta 92/96/M9 M HK VP40 M Sig P226 9mm L
Beretta APX M HK VP9 M Sig P228 L
Beretta PX-4 Storm 9mm/40 M Kahr CW .40 S Sig P229 .40/357 L
Browning Hi- Power 9mm/40 M Kahr CW .45 S Sig P229 9mm L
Colt .45 Double Stack L Kahr CW 9mm S Sig P238 S
Colt .45 Single Stack S Kahr K .40 S Sig P239 .40/357 S
CZ 75/85 M Kahr K .45 S Sig P239 9mm S
CZ P-01 M Kahr K 9mm S Sig P290 S
CZ SP-01 M Kahr MK .40 S Sig P320/ P250 9mm/.40 L
FMK 9C1G2 M Kahr MK .45 S Sig P320/P250 .45 L
FN 5.7 L Kahr MK 9mm S Sig P938 S
Glock .45 Double Stack L Kahr P .40 S Springfield Eagle 5" L
Glock .45 GAP L Kahr P .45 S Springfield XD .45 L
Glock 42 S Kahr P 9mm S Springfield XD 9mm/40 L
Glock 43 S Kahr PM .40 S Springfield XDM .45 L
Glock 9mm/.40/357 L Kahr PM .45 S Springfield XDM 9mm/40 L
HK HK45 L Kahr PM 9mm S Springfield XD-S .45 S
HK P2000 M Kimber .45 Double Stack L STI Edge L
HK P2000SK M Kimber .45 Single Stack S SW Bodyguard .380 S
HK P30 M Kimber LCP S SW M&P Shield .45 S
HK P30L M Kimber Solo S SW M&P Shield 9mm/40 S
HK USP Compact .40 Plastic L Ruger LC9 S Walther PPQ .45 L
HK USP Compact .40 Steel M Ruger SR9 L Walther PPQ 9mm/.40 M
HK USP Compact .45 Plastic/Steel L S&W M&P .45 L Walther PPS S
HK USP Compact 9mm Steel/Steel L S&W M&P 9mm/40/357 L Walther PDP 4" M

The Concealment Pouch is purchased with the Standard Clip attached.

Additional Clips and Styles Can Be Purchased on Our Holster Parts and Hardware Page:

Standard Clips: A “P” shaped clip that slides over the top of the belt and hooks underneath. Holster may be put on while belt is already threaded through loops. Not recommended for nylon belts.
C-Clip: A “C” shaped clip that grips the belt at the top and bottom. The belt must be fed through clips while putting it on. These clips have less visible surface area showing during concealment. C-clips work with all types of belts, ideal for nylon.
V-Clip: Clips slide over the waistband of pants and attach to hook on inside of belt. Holster attaches before belt is put on through pant loops. V-clips offer the highest level of concealment with no part of the clip visible outside of the pants. The loop is provided with these clips. The easiest way to attach this clip is to a belt with the loop already sewn on. Please see Comp-Tac Kydex Reinforced Loop Belt for this option.
Thread On Clip: The Thread On Clip is a completely solid clip that the belt must be slide through when putting on. The Thread On clips are recommended for belts that are less than 1/4" thick.

Disclaimer:
Comp-Tac® products are constructed to fit standard factory equipped guns only. Additions such as trigger shoes, extended slide releases, laser sights or any alteration to the frame or external dimensions of the gun itself may render the holster unsafe and increase the risk of an accidental discharge. At no time should a handgun other than the make and models of gun for which the holster is made be used in a Comp-Tac® holster. It is the user’s sole responsibility throughout the serviceable life of the holster to personally check for proper fit and retention with an unloaded handgun. If any Comp-Tac® product becomes worn, loose or ill-fitting with age, you should cease use immediately. Because HSGI® and Comp-Tac® have no control over how their holsters and/or accessories will be used, or who they will be used by after their purchase, we disclaim any and all liability for incidental or consequential damages to person(s) and/or property resulting from the use of any HSGI® or Comp-Tac® product, including wear on firearm finish.

Leather is natural product with unique characteristics that differ from hide to hide. Due to these differences shade and color variations are to be expected. This is not a fault or flaw in leather, Comp-Tac uses genuine natural top grain cow-hide to make all of our Comp-Tac leather products.

Returns/ Exchanges: Due to the cosmetic vulnerability of leather, Comp-Tac reserves the right to charge a 20% restocking fee on any leather returns or exchanges that are deemed to be damaged or abused.

Attachments